Omnicell Basic Training Registration

Burnaby Hospital Training Room is in the Health Care Pavilion (new tower), 3rd Level, Room 3150. If using public elevators, the Training room is directly across elevators, on the 3rd floor.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

Before you attend the class you must have Fraser Health (FH) Windows username and password established (except students and clinical groups). Please plan to use a computer your unit, at least 30 mins prior to your training. Alternatively, you can call Service Desk at 604-585-5544 to reset your password from home. When you reach a representative say, “I would like to reset my password.”

Computer training room is located on the main floor. Please follow yellow signage. Enter door next to the anesthetic consult room.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

Room T050 located in the basement of Columbia Tower (blue zone). Exit public elevators and look left for door marked "Omnicell Training". Please plan accordingly, late registrants cannot be accommodated.

At CGH, the Omnicell training room #4007 is located in Pharmacy, B wing 4th floor. From the main entrance, take the elevator to the 2nd floor. Exit. Walk towards ICU and take the elevators outside ICU to the 4th floor. Allow an extra 15 minutes to find parking.

Room T050 located in the basement of Columbia Tower (blue zone). Exit public elevators and look left for door marked "Omnicell Training". Please plan accordingly, late registrants cannot be accommodated.

Room T050 located in the basement of Columbia Tower (blue zone). Exit public elevators and look left for door marked "Omnicell Training". Please plan accordingly, late registrants cannot be accommodated.

Burnaby Hospital Training Room is in the Health Care Pavilion (new tower), 3rd Level, Room 3150. If using public elevators, the Training room is directly across elevators, on the 3rd floor.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

Before you attend the class you must have Fraser Health (FH) Windows username and password established (except students and clinical groups). Please plan to use a computer your unit, at least 30 mins prior to your training. Alternatively, you can call Service Desk at 604-585-5544 to reset your password from home. When you reach a representative say, “I would like to reset my password.”

Room T050 located in the basement of Columbia Tower (blue zone). Exit public elevators and look left for door marked "Omnicell Training". Please plan accordingly, late registrants cannot be accommodated.

Computer training room is located on the main floor. Please follow yellow signage. Enter door next to the anesthetic consult room.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

Omnicell training room/ office- located just inside E2A unit, 2nd floor, East side. This is a closed unit. Access sensor near elevator.
Note:
-This is a 2 hr. session.
-Currently No parking available on site. Please allow extra time. Parking under construction- estimated completion November

At CGH, the Omnicell training room #4007 is located in Pharmacy, B wing 4th floor. From the main entrance, take the elevator to the 2nd floor. Exit. Walk towards ICU and take the elevators outside ICU to the 4th floor. Allow an extra 15 minutes to find parking.

Burnaby Hospital Training Room is in the Health Care Pavilion (new tower), 3rd Level, Room 3150. If using public elevators, the Training room is directly across elevators, on the 3rd floor.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

Before you attend the class you must have Fraser Health (FH) Windows username and password established (except students and clinical groups). Please plan to use a computer your unit, at least 30 mins prior to your training. Alternatively, you can call Service Desk at 604-585-5544 to reset your password from home. When you reach a representative say, “I would like to reset my password.”

Omnicell training room/ office- located just inside E2A unit, 2nd floor, East side. This is a closed unit. Access sensor near elevator.
Note:
-This is a 2 hr. session.
-Currently No parking available on site. Please allow extra time. Parking under construction- estimated completion November

Room T050 located in the basement of Columbia Tower (blue zone). Exit public elevators and look left for door marked "Omnicell Training". Please plan accordingly, late registrants cannot be accommodated.

Computer training room is located on the main floor. Please follow yellow signage. Enter door next to the anesthetic consult room.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

Computer training room is located on the main floor. Please follow yellow signage. Enter door next to the anesthetic consult room.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

Burnaby Hospital Training Room is in the Health Care Pavilion (new tower), 3rd Level, Room 3150. If using public elevators, the Training room is directly across elevators, on the 3rd floor.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

Before you attend the class you must have Fraser Health (FH) Windows username and password established (except students and clinical groups). Please plan to use a computer your unit, at least 30 mins prior to your training. Alternatively, you can call Service Desk at 604-585-5544 to reset your password from home. When you reach a representative say, “I would like to reset my password.”

At CGH, the Omnicell training room #4007 is located in Pharmacy, B wing 4th floor. From the main entrance, take the elevator to the 2nd floor. Exit. Walk towards ICU and take the elevators outside ICU to the 4th floor. Allow an extra 15 minutes to find parking.

Omnicell training room/ office- located just inside E2A unit, 2nd floor, East side. This is a closed unit. Access sensor near elevator.
Note:
-This is a 2 hr. session.
-Currently No parking available on site. Please allow extra time. Parking under construction- estimated completion November

Room T050 located in the basement of Columbia Tower (blue zone). Exit public elevators and look left for door marked "Omnicell Training". Please plan accordingly, late registrants cannot be accommodated.

Burnaby Hospital Training Room is in the Health Care Pavilion (new tower), 3rd Level, Room 3150. If using public elevators, the Training room is directly across elevators, on the 3rd floor.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

Before you attend the class you must have Fraser Health (FH) Windows username and password established (except students and clinical groups). Please plan to use a computer your unit, at least 30 mins prior to your training. Alternatively, you can call Service Desk at 604-585-5544 to reset your password from home. When you reach a representative say, “I would like to reset my password.”

Room T050 located in the basement of Columbia Tower (blue zone). Exit public elevators and look left for door marked "Omnicell Training". Please plan accordingly, late registrants cannot be accommodated.

At CGH, the Omnicell training room #4007 is located in Pharmacy, B wing 4th floor. From the main entrance, take the elevator to the 2nd floor. Exit. Walk towards ICU and take the elevators outside ICU to the 4th floor. Allow an extra 15 minutes to find parking.

Computer training room is located on the main floor. Please follow yellow signage. Enter door next to the anesthetic consult room.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

Burnaby Hospital Training Room is in the Health Care Pavilion (new tower), 3rd Level, Room 3150. If using public elevators, the Training room is directly across elevators, on the 3rd floor.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

Before you attend the class you must have Fraser Health (FH) Windows username and password established (except students and clinical groups). Please plan to use a computer your unit, at least 30 mins prior to your training. Alternatively, you can call Service Desk at 604-585-5544 to reset your password from home. When you reach a representative say, “I would like to reset my password.”

At CGH, the Omnicell training room #4007 is located in Pharmacy, B wing 4th floor. From the main entrance, take the elevator to the 2nd floor. Exit. Walk towards ICU and take the elevators outside ICU to the 4th floor. Allow an extra 15 minutes to find parking.

Omnicell training room/ office- located just inside E2A unit, 2nd floor, East side. This is a closed unit. Access sensor near elevator.
Note:
-This is a 2 hr. session.
-Currently No parking available on site. Please allow extra time. Parking under construction- estimated completion November

Room T050 located in the basement of Columbia Tower (blue zone). Exit public elevators and look left for door marked "Omnicell Training". Please plan accordingly, late registrants cannot be accommodated.

Burnaby Hospital Training Room is in the Health Care Pavilion (new tower), 3rd Level, Room 3150. If using public elevators, the Training room is directly across elevators, on the 3rd floor.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

Before you attend the class you must have Fraser Health (FH) Windows username and password established (except students and clinical groups). Please plan to use a computer your unit, at least 30 mins prior to your training. Alternatively, you can call Service Desk at 604-585-5544 to reset your password from home. When you reach a representative say, “I would like to reset my password.”

At CGH, the Omnicell training room #4007 is located in Pharmacy, B wing 4th floor. From the main entrance, take the elevator to the 2nd floor. Exit. Walk towards ICU and take the elevators outside ICU to the 4th floor. Allow an extra 15 minutes to find parking.

Computer training room is located on the main floor. Please follow yellow signage. Enter door next to the anesthetic consult room.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

Room T050 located in the basement of Columbia Tower (blue zone). Exit public elevators and look left for door marked "Omnicell Training". Please plan accordingly, late registrants cannot be accommodated.

Omnicell training room/ office- located just inside E2A unit, 2nd floor, East side. This is a closed unit. Access sensor near elevator.
Note:
-This is a 2 hr. session.
-Currently No parking available on site. Please allow extra time. Parking under construction- estimated completion November

Burnaby Hospital Training Room is in the Health Care Pavilion (new tower), 3rd Level, Room 3150. If using public elevators, the Training room is directly across elevators, on the 3rd floor.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

Before you attend the class you must have Fraser Health (FH) Windows username and password established (except students and clinical groups). Please plan to use a computer your unit, at least 30 mins prior to your training. Alternatively, you can call Service Desk at 604-585-5544 to reset your password from home. When you reach a representative say, “I would like to reset my password.”

Computer training room is located on the main floor. Please follow yellow signage. Enter door next to the anesthetic consult room.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

Omnicell training room/ office- located just inside E2A unit, 2nd floor, East side. This is a closed unit. Access sensor near elevator.
Note:
-This is a 2 hr. session.
-Currently No parking available on site. Please allow extra time. Parking under construction- estimated completion November

Computer training room is located on the main floor. Please follow yellow signage. Enter door next to the anesthetic consult room.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

Room T050 located in the basement of Columbia Tower (blue zone). Exit public elevators and look left for door marked "Omnicell Training". Please plan accordingly, late registrants cannot be accommodated.

At CGH, the Omnicell training room #4007 is located in Pharmacy, B wing 4th floor. From the main entrance, take the elevator to the 2nd floor. Exit. Walk towards ICU and take the elevators outside ICU to the 4th floor. Allow an extra 15 minutes to find parking.

Burnaby Hospital Training Room is in the Health Care Pavilion (new tower), 3rd Level, Room 3150. If using public elevators, the Training room is directly across elevators, on the 3rd floor.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

Computer training room is located on the main floor. Please follow yellow signage. Enter door next to the anesthetic consult room.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

Room T050 located in the basement of Columbia Tower (blue zone). Exit public elevators and look left for door marked "Omnicell Training". Please plan accordingly, late registrants cannot be accommodated.

Burnaby Hospital Training Room is in the Health Care Pavilion (new tower), 3rd Level, Room 3150. If using public elevators, the Training room is directly across elevators, on the 3rd floor.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

Room T050 located in the basement of Columbia Tower (blue zone). Exit public elevators and look left for door marked "Omnicell Training". Please plan accordingly, late registrants cannot be accommodated.

Computer training room is located on the main floor. Please follow yellow signage. Enter door next to the anesthetic consult room.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

At CGH, the Omnicell training room #4007 is located in Pharmacy, B wing 4th floor. From the main entrance, take the elevator to the 2nd floor. Exit. Walk towards ICU and take the elevators outside ICU to the 4th floor. Allow an extra 15 minutes to find parking.

Omnicell training room/ office- located just inside E2A unit, 2nd floor, East side. This is a closed unit. Access sensor near elevator.
Note:
-This is a 2 hr. session.
-Currently No parking available on site. Please allow extra time. Parking under construction- estimated completion November

Burnaby Hospital Training Room is in the Health Care Pavilion (new tower), 3rd Level, Room 3150. If using public elevators, the Training room is directly across elevators, on the 3rd floor.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

Room T050 located in the basement of Columbia Tower (blue zone). Exit public elevators and look left for door marked "Omnicell Training". Please plan accordingly, late registrants cannot be accommodated.

Omnicell training room/ office- located just inside E2A unit, 2nd floor, East side. This is a closed unit. Access sensor near elevator.
Note:
-This is a 2 hr. session.
-Currently No parking available on site. Please allow extra time. Parking under construction- estimated completion November

Computer training room is located on the main floor. Please follow yellow signage. Enter door next to the anesthetic consult room.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

At CGH, the Omnicell training room #4007 is located in Pharmacy, B wing 4th floor. From the main entrance, take the elevator to the 2nd floor. Exit. Walk towards ICU and take the elevators outside ICU to the 4th floor. Allow an extra 15 minutes to find parking.

Room T050 located in the basement of Columbia Tower (blue zone). Exit public elevators and look left for door marked "Omnicell Training". Please plan accordingly, late registrants cannot be accommodated.

Omnicell training room/ office- located just inside E2A unit, 2nd floor, East side. This is a closed unit. Access sensor near elevator.
Note:
-This is a 2 hr. session.
-Currently No parking available on site. Please allow extra time. Parking under construction- estimated completion November-December

Computer training room is located on the main floor. Please follow yellow signage. Enter door next to the anesthetic consult room.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

At CGH, the Omnicell training room #4007 is located in Pharmacy, B wing 4th floor. From the main entrance, take the elevator to the 2nd floor. Exit. Walk towards ICU and take the elevators outside ICU to the 4th floor. Allow an extra 15 minutes to find parking.

Burnaby Hospital Training Room is in the Health Care Pavilion (new tower), 3rd Level, Room 3150. If using public elevators, the Training room is directly across elevators, on the 3rd floor.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

Omnicell training room/ office- located just inside E2A unit, 2nd floor, East side. This is a closed unit. Access sensor near elevator.
Note:
-This is a 2 hr. session.
-Currently No parking available on site. Please allow extra time. Parking under construction- estimated completion November-December

Computer training room is located on the main floor. Please follow yellow signage. Enter door next to the anesthetic consult room.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

Room T050 located in the basement of Columbia Tower (blue zone). Exit public elevators and look left for door marked "Omnicell Training". Please plan accordingly, late registrants cannot be accommodated.

At CGH, the Omnicell training room #4007 is located in Pharmacy, B wing 4th floor. From the main entrance, take the elevator to the 2nd floor. Exit. Walk towards ICU and take the elevators outside ICU to the 4th floor. Allow an extra 15 minutes to find parking.

Burnaby Hospital Training Room is in the Health Care Pavilion (new tower), 3rd Level, Room 3150. If using public elevators, the Training room is directly across elevators, on the 3rd floor.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

Computer training room is located on the main floor. Please follow yellow signage. Enter door next to the anesthetic consult room.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

Omnicell training room/ office- located just inside E2A unit, 2nd floor, East side. This is a closed unit. Access sensor near elevator.
Note:
-This is a 2 hr. session.
-Currently No parking available on site. Please allow extra time. Parking under construction- estimated completion November-December

Room T050 located in the basement of Columbia Tower (blue zone). Exit public elevators and look left for door marked "Omnicell Training". Please plan accordingly, late registrants cannot be accommodated.

Burnaby Hospital Training Room is in the Health Care Pavilion (new tower), 3rd Level, Room 3150. If using public elevators, the Training room is directly across elevators, on the 3rd floor.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

Burnaby Hospital Training Room is in the Health Care Pavilion (new tower), 3rd Level, Room 3150. If using public elevators, the Training room is directly across elevators, on the 3rd floor.

Note: Please plan ahead and allow extra time to find parking. Registrants who are more than 15 minutes late cannot be accommodated.

At CGH, the Omnicell training room #4007 is located in Pharmacy, B wing 4th floor. From the main entrance, take the elevator to the 2nd floor. Exit. Walk towards ICU and take the elevators outside ICU to the 4th floor. Allow an extra 15 minutes to find parking.

At CGH, the Omnicell training room #4007 is located in Pharmacy, B wing 4th floor. From the main entrance, take the elevator to the 2nd floor. Exit. Walk towards ICU and take the elevators outside ICU to the 4th floor. Allow an extra 15 minutes to find parking.

At CGH, the Omnicell training room #4007 is located in Pharmacy, B wing 4th floor. From the main entrance, take the elevator to the 2nd floor. Exit. Walk towards ICU and take the elevators outside ICU to the 4th floor. Allow an extra 15 minutes to find parking.